MENU OPERATION
15
MENU OPERATION
14
6.1.1.B. MANUAL CHANNEL SEARCH
When you are in the transponder window (right side of this screen), you can add, delete or edit
transponder information and also scan the selected transponder to find the channels. Select the
transponder using “up/down” keys or “page up/down” keys and press “OK” key to start search for the
selected transponder. You can also monitor the status
of searching process.
When you want the other satellite than current one,
move to the satellite window and change it to new one.
You can move between the satellite window and the
transponder window by pressing “FAV” key or
“ left / right” keys (
◀∙▶).
If you cannot find the desired transponder from the
transponder list, you can add new one by pressing
“ F1” key and entering appropriate parameters for this
transponder. When you want to modify the parameters
of an existent transponder, select thetransponder and enter into the edit mode by pressing “F2” key.
After change all the necessary parameters, press “Exit” key to escape from the edit mode. You can
also delete unwanted transponders by pressing “F3” key.
Each parameter has following meanings.
6.1. 2. Edit Channels
You can edit channels, group them into the favorite list and also change the properties of each
channel on various channel lists from this menu.
Select “ Edit Channels ” item in the main menu, and you will be asked to enter your PIN code.
You can find the following “ Edit Channels ” screen when you enter the correct PIN code.
There are two modes in editing the channels – normal mode and block mode.
Freq.
S/R
PoI.
FEC
: Input the frequency of the transponder you want to find manually.
: Inputs the symbol rate of the transponder you want to find.
: Select the polarization of the transponder you want to find. In the case of horizontal,
18V and in the case vertical, 13V are output through LNB line.
: Select the FEC of the transponder you want to find. You can select the value of 1/2,
2/3, 3/4, 5/6, 7/8 or auto.
In normal mode, you can edit each channel separately.
You can add to the selected channel into the favorite list.
And you can also delete, lock/unlock or rename each
channel. In block mode, you can edit multiple channels
at a time. You can select multiple channels and add
them to the favorite list.
You can also delete, move or lock/unlock them at a
time. To select block, move to a channel and press “ OK
” key and move to another channel and press “ OK ”
key, so on. When you want to exit block mode, press
“Exit” key to return to the normal mode.
You can change the list you want to edit using “
” key and “FAV” key. When you press “
” key,
the current list is changed between TV channel list and Radio channel list. When you press “FAV ”
key, the current list is changed as follows All channels
FTA channels
Scrambled channels
Favorite 1~ 8 channels.
6.1.2.A. Add to favorite list – F1 key
Select channel that you want to add to the favorite list using the “up/down” keys and the “ page up /
down ” keys. When you want to add multiple channels into the same favorite list, set those channels
as block by pressing “ OK ” key at each channel. You can also deselect each selected channel by
pressing “ OK ” key again. After select channel or set block, press “F1” key to invoke “Add To
Favorites” window. Select favorite list you want from the window.
Please note that you can not invoke “Add To Favorites” window when the current channel list is the
favorite list.
You can also sort the channel list by pressing “
i
” key.
6.1.2.B. Edit channel name – F2 key in normal mode
Select channel that you want to rename using the “ up / down ” keys and the “ page up / down ” keys.
Press “ F2 ” key to invoke the keypad window and enter new name from the window. In block mode,
you cannot edit channel name as multiple channels are selected. Please note that you can edit not a
channel name but a channel list name when the current channel list is the favorite list.