UPGRADE BY SATELLITE
27
UPGRADE BY SATELLITE
26
1.D. If new software found then the list of
new software and data will be displayed.
Select [Yes] or [No] for each item to
upgrade or not and press “ OK ” button
to start upgrade.
If you do not want to upgrade, press
“ EXIT ” key to return previous menu.
1.E. Receive and update new s/w. It takes
about 20 to 50 minutes.
You can stop upgrading at anytime
before download completes (e.g. before
progress bar reaches 100%).
But if download completes, you should
not switch off power until the message
as next step (1.F.) appears.
1.F. When download completes
successfully, you can see the message
in the left figure. At this moment,
you have to reboot the receiver to run
with new s/w.
1.A. The default satellite and transponder will
be automatically selected for download.
Please check if LNB and DiSEqC
settings are correct and press “ OK ”
button to find new software.
1.B. If the default channel found, the
following message appears. Otherwise,
go to step 1.A.
1.C. Then the receiver automatically scans
new software. It takes about maximum
5 minutes.
7. UPGRADE BY SATELLITE
Do not switch off the Receiver during the data download!
You can upgrade your receiver up to date, when the new software is available.
Select “Receiver upgrade” in the “Receiver Settings” Menu to enter Software download.
1. Select “Upgrade via satellite” item and the “ Scan default channel” window will appear as
follows.