MENU OPERATION
17
MENU OPERATION
16
6.1.2.C. Delete channel – F3 key
Select channel that you want to delete using the “ up / down ” keys and the “ page up/ down ” keys.
When you want to delete multiple channels at a time, set channels as block by pressing “OK” key at
each channel. You can also deselect each selected channel by pressing “OK” key again. After select
channel or set block, press “F3” key to delete the selected channel(s).
6.1.2.D. Lock/Unlock channel – F4 key
Select channel that you want to lock or unlock using the “ up / down ” keys and the “ page up / down ”
keys. When you want to lock or unlock multiple channels at a time, set channels as block by pressing
“OK” key at the each channel. You can also deselect each selected channel by pressing “OK” key
again. After select channel or set block, press “F4” key to lock or unlock the selected channel(s).
6.1.2.E. Move channel – F2 key in block mode.
You can change the position of channels in the channel list by selecting them as a block and move
them. Select channel(s) you want to move using the “ up / down ” keys and the “ page up / down ”
keys and press “OK” key. After set block, press “F2” to enter block move mode. You can move
selected block of channels by using “ up / down ”, “ left / right ” or “ page up / down ” keys in the
channel list. After move to the new position, press “OK” key to locate those channels at this position.
6.1.3. Receiver Settings
You can change the various settings of your receiver in this menu.
6.1.3.A.System Settings
This menu helps you to Set up Ianguage and
parameters related with RF modulator.
Select
“
System Settings
”
menu in the “Receiver
Setting”Menu, and the following screen will be displayed.
: Select or change RF channel number when your receiver is
connected to TV by RF connector. The factory preset value is
channel 45.
: In the above case, you can choose PAL B/G mode or PAL I mode or
PAL D/K mode.
: You can select the transparency of the menu.
: You can select the menu language.
: You can select the audio language.
: You can set how long the information box will be displayed.
RF Channel
RF Mode
Menu Transparency
Menu Language
Audio Language
Information Timeout
: Select video output mode - CVBS or RGB
: You can choose either 4:3 or 16:9 according to the TV type.
: You can choose pan & scan or full or letterbox.
: You can set Dolby off/on, Audio system takes preference of Dolby
mode when you select “on”.
: Select display mode - Auto or PAL or NTSC
: Select HDMI Mode - 1080i, 720p, 576p
TV Select
Screen Type
Aspect Ratio
DOLBY Off / On
Display Mode
HDMI Mode
Press the
“
menu
”
key or
“
exit
”
key to return to previous menu.
The AC3 Audio not support through the HDMI output.
Since the HDMI output presents the upscaled video of SD decoded programs, its video quality
may not be as good as that of normal HD programs. This product decodeds SD programs and
then, upscales them to HD programs.
6.1.3.B. A/V Settings
This menu helps you to Set up video output mode,
screen type, Dolby mode and HDMI mode,etc.
Select
“
A/V Settings
”
menu in the “Receiver
Setting”Menu, and the following screen will be displayed.