Page 6 of 15
Surface Mounting
Mount the Mounting Bracket Base in the desired location using four #10 / M4 screws (by others,
as above).
Slide the mating Mounting Bracket (attached to the Unit) into the Mounting Bracket Base until the
locking clip engages, and install the provided 8-
18 x .500” SS Thread Forming Torx Button Head
Security Screw in the hole on the left side of the Bracket assembly.
Figure 1: Surface Mounting Diagram
Mounting Orientation
The 7400-5902 Multiverse Vero Transceiver must be mounted exclusively in an upright mounting
position with the cable entries on the bottom and antenna connector on the top as shown in the
drawing above.
Pipe Mounting
The Multiverse Vero Transceiver can also be mounted on a pipe. Attach the Mounting Bracket
Base to a pipe using a stainless steel hose clamp (not included) as shown:
