MULTI-TOUCH-MONITOR MTIR560QHD-V1
5
1 Precautions
Please carefully read these instructions before you
start. Failure to follow these instructions may result in
damage or personal injury
1.1 General
Safety
·
The unit must be set-up by authorized and
qualified personnel only.
·
Always obey relevant local safety regulations
·
Setting up should be performed by two people.
· MTIR560QHD-V1
Multi-Touch-Monitor
should
only be used with the specified input voltage
conditions (see LC-5621 monitor manual).
·
Use only with suitably earthed mains outlets!
·
Any extension leads used should be of a suitable
specification and suitably earthed
·
Modification of protective earth connections inside
or outside the device is dangerous and not
allowed.
·
Do not use this device if it, or its cables, are
damaged in any way..
·
Unplug the device before attempting any cleaning
or maintenance operations. Unplug the device
when not in use for prolonged periods.
·
During cleaning do not permit liquids to enter the
device
Do not use the device near water or other liquids,
there is a danger of electrical shock.
·
Take care to route all cables in a way that nobody
can trip or get caught.
·
Repair of MTIR560QHD-V1 by un-authorised
personnel is not allowed. Electrical works should
be undertaken by a professional electrician only.
·
The device housing should not be opened or
removed by un- authorised personnel.
Safety features on the device should not be
removed or by-passed.
Please also read the precautions from Barco LC-5621
manual.
l
1.2
Shipment and Transportation
Please check device for damage and shotages
immediately upon receipt
Claims for damages or missing parts should be made
immediately.
To avoid damages to the LCD screen or the front
glass window, always transport the device in an
upright position only.
1.3 Operation
The monitor with multi-touch functionality as described
herein may be operated in a vertical or horizontal
position.
By using appropriate stands the monitor can be
readily used on a suitable desk or table top, it may
also be integrated within a table, or mounted to a wall
by using the appropriate mounting fixtures.
For further installation instructions see the original LC-
5621 manual.
When designing your mounting please be sure to
allow for sufficient ventilation of the device.
Any other use is allowed only with written permission
from the manufacturer.
If the device is modified or used in any other way all
warranty and warranty claims are void.
