background image

108

   Child  safety   

JUMPY-ATLANTE-VP_EN_CHAP04_SECURITE_ED01-2014

 DEACTIVATING  THE 

PASSENGER'S  FRONT  AIRBAG  

  Never install a rearward facing child 

restraint system on a seat protected by 

an active front airbag. This could cause the 

death of the child or serious injury.  

Installation of a child seat at 

the rear 

  "Rearward  facing" 

 When a "rearward facing" child seat is 

installed  

on a rear passenger seat

 ,  move 

the vehicle's front seat forwards and 

straighten the backrest so that the "rearward 

facing" child seat does not touch the 

vehicle's front seat.  

  "Forward  facing" 

 When a "forward facing" child seat is 

installed  

on a rear passenger seat

 ,  move 

the vehicle's front seat forwards and 

straighten the backrest so that the legs of 

the child in the "forward facing" child seat do 

not touch the vehicle's front seat.  

  Ensure that the seat belt is correctly 

tensioned. 

 For child seats with a support leg, ensure 

that this is in firm contact with the floor. 

If necessary, adjust the front seat of 

the  vehicle.   

  The warning label present on both sides 

of the passenger's sun visor repeats this 

advice. In line with current legislation, the 

following tables contain this warning in all of 

the languages required.  

  Passenger  airbag  OFF  

  For information on deactivating the 

passenger's front airbag, refer to the 

"Airbags"  section.   

Summary of Contents for Jumpy Miltispace





































































































































































Reviews: