CITROËN Jumpy Miltispace Owner'S Handbook Manual Download Page 152

Page: 152 / 164

153

Having your vehicle towed

QUICK HELP

JUMPY-ATLANTE-VP_EN_CHAP07_AIDE RAPIDE_ED01-2014

Without lifting (4 wheels on the ground)

You should always use a towing bar.

From the front

- Unclip the cover by pressing at the

bottom,

- Fully screw in the removable towing eye.

TOWING THE VEHICLE

Lifting (2 wheels on the ground only)

It is preferable to lift the vehicle using

professional lifting equipment.

From the rear

- Unclip the cover using a coin or the flat

part of the towing eye,

- Fully screw in the removable towing eye.

Vehicles fitted with a manual

gearbox (Diesel version)

In the case of vehicles fitted with a manual

gearbox, the gear lever must be in the

neutral position. Failure to observe this

special condition may result in damage

to certain braking components and the

absence of braking assistance the next time

the engine is started.

Summary of Contents for Jumpy Miltispace





































































































































































Search results

Summary of Contents for Jumpy Miltispace

Reviews:

Related manuals for Jumpy Miltispace

Brands by name

Popular brands

CITROËN Jumpy Miltispace, Owner'S Handbook Manual

Search results

Summary of Contents for Jumpy Miltispace

Reviews:

Related manuals for Jumpy Miltispace

Brands by name

Popular brands