CITROËN C Zero, Handbook

Page: 97 / 136

8
95
In the event of a breakdown
Fitting a wheel
F
Remove the bolts and store them in a clean
place.
F
Remove the wheel.
F
Put the wheel in place on the hub.
F
Screw in the bolts by hand to the stop.
F
Pre-tighten the bolts using the wheelbrace.
F
Lower the vehicle fully.
F
Fold the jack and detach it.
After changing a wheel
Have the tightness of the bolts and the
pressure of the new wheel checked by a
CITROËN dealer or a qualified workshop
without delay.
F
Tighten the bolts using the wheelbrace.
Changing a bulb
The headlamps have polycarbonate
lenses with a protective coating:
F
do not clean them using a dry or
abrasive cloth, nor with a detergent
or solvent product,
F
use a sponge and soapy water or a pH
neutral product,
F
when using a high pressure washer
on persistent marks, do not keep the
lance directed towards the lamps or
their edges for too long, so as not to
damage their protective coating and
seals.
Changing a bulb must only be done after
the lamp has been switched off for several
minutes (risk of serious burns).
F
Do not touch the bulb directly with your
fingers, use a lint-free cloth.
It is essential only to use anti-ultraviolet
(UV) type bulbs, so as not to damage the
lamp.
Always replace a failed bulb with a new
bulb with the same type and specification.
https://www.automotive-manuals.net/