CITROËN C Zero, Handbook

Page: 103 / 136

8
101
In the event of a breakdown
Changing a fuse
Access to the tools
The extraction tweezers are fitted to the back
of the dashboard fusebox cover.
To access them:
F
Unclip the protective cover and remove it
completely by pulling it towards you.
F
Pull out the tweezers.
Changing a fuse
Good Failed
Tweezers
Before changing a fuse, the cause of the fault
must be found and rectified.
F
Make sure that the ignition switch is set to
the "LOCK" position.
F
Identify the failed fuse by checking the
condition of its filament.
F
Use the special tweezers to extract the fuse
from its housing.
F
Always replace the faulty fuse with a fuse of
the same rating.
F
Check that the number marked on the
fusebox, the rating marked on the fuse and
the following tables all agree.
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your vehicle,
contact a CITROËN dealer or a qualified
workshop.
CITROËN accepts no responsibility for the
cost incurred in repairing your vehicle or
for rectifying malfunctions resulting from
the installation of accessories not supplied
and not recommended by CITROËN
and not installed in accordance with its
specifications, in particular when the
combined power consumption of all of the
additional equipment connected exceeds
10 milliamperes.
F
Turn the bulb holder and remove it.
F
Remove the bulb and replace it.
To refit, carry out these operations in reverse
order.
https://www.automotive-manuals.net/