Citizen TSV-400GP, Instruction Manual

Page: 9 / 36

- 8 -
○ Semiconductor relay output signal
The semiconductor relay output signal turns the output circuit on for 2 seconds every
hour on the hour after the GPS signal is received. (The circuit is an electronic switch
that uses the MOS FET relay.)
If the signal cannot be received, output is stopped after more than 24 hours has
passed from the last reception. Output resumes when the signal is received again.
Output rating Applicable voltage: 24V DC or less
Maximum current: 200mA
Maximum output on resistance: 2Ω
Circuit Structure
No. of circuits Dual system
Connectable cables Single wire: φ0.4mm (AWG26) - φ1.2 (AWG16)
Stranded wire: φ0.3mm (AWG22) - φ1.25 (AWG16)
Strand diameter: φ0.18mm or over
Signal converter internal
circuit
Semiconductor relay output terminal