Citizen TSV-400GP, Instruction Manual

Page: 12 / 36

- 11 -
[Signal converter (time server) installation]
Install the signal converter (time server) indoors. The back of this unit is fitted with a
non-slip material, and can be installed in flat locations without the need for fixing in
place. Be sure to fix in place if installing on a wall or unstable location.
○ When fixing the signal converter
Fix the signal converter in place
using self-tapping screws.
Self-tapping screws are not
provided.
○ Cable connections
Use a flat head screwdriver to press and
hold the cable release button
and insert the cable into the cable
connector.
After inserting the cable, release the cable
release button and check that the cable
cannot easily be pulled out.
○ Cable support
Hook the cables and AC adapter onto the
cable support hook. This is to prevent
cables from coming out.
○ Connecting shielding wires
In cases where cables are extended or there are concerns about the effects of noise
when cables are wired in parallel, connect shielding wire to the SG terminal.
Please prepare 3.5mm
self-tapping screws
Installation hole
Cable release button
Cable connector
Cable
Flat head screwdriver (tip width 2.6mm)
Cable
Cable support
SG terminal