
-
61
-
Setting the left margin/ ESC I
[ASCII]
ESC
I
n
[Decimal] 27
108
n
[Hexadecimal] 1B 6C n
[Parameter] 1
≤
n
≤
255
[Description]
●
Sets the left margin by n columns.
●
‘n' indicates the number of columns from the physical printing start position of the printer.
●
Specify ‘n’ based on the character width currently set. Therefore, the maximum value of ‘n’ changes depending on the
character width. The character width at the time of setting includes the value of character-to-character space rate. When
10CPI, 12CPI, 15CPI, reduced printing, or double-wide enlarged printing is specified, data are processed in units of the
character width specified.
●
For proportional printing, set the value taking character pitch as 10CPI.
●
Even when the interval with the right margin is one character or less, at least one character is printed.
●
Upon this setting, data in the print buffer will be cleared. Be sure to set this command at the head of a line.
●
Once the left margin is set, even when character width is changed, the right margin position does not change.
●
Default is 0-dot position.
Summary of Contents for PD-24
Page 6: ...6 Citizen original command ...
Page 53: ...53 ESC P Emulation Command ...
Page 106: ...106 HT 64 LF 54 SI 77 SO 78 VT 65 ...
Page 127: ......