- 79 -
25. COMMANDS ABOUT ERRORS
Command Error
number
Error description
"control sum error"
1.1
Errors during date transmission
"Error A/D"
1.2
Converter error
"Exceed range"
2.1
Exceed max measure range of the balance
"Exceed range"
2.2
Exceed max measure range of the balance
"A/D Null"
2.3
No divisions from converter
"A/D Full"
2.4
Exceed max value converter intervals
"Tara/Zero above the
range"
2.5
Exceed admissible tare or zero value
"Tara above the range"
2.6
Exceed admissible tare value for the
balances
"Zero above the range"
2.7
Exceed zero range for the balances
"Result > 4% Max"
2.8
To high start mass (start the balance up with
load on the pan)
"Result> 1% Max"
2.9
Difference between determined calibration
mass and calibration mass recorded in the
balance memory higher than (difference
>1%)
"Piece < 1 Div"
2.10
Singular mass value in counting pieces
function less than actual scale interval
Piece < 10 Div"
2.11
Mass on the pan during determining mas sof
singular piece in the function of counting
pieces less than 10 actual scale intervals
"Ref < 1000 Div"
2.12
Value of reference mass in the function
deviations is less than 1000 actual scales
intervals
"Above the range"
3.1
The parameter value above the range
"Faulty value"
3.2
Inadmissible value of parameter
"Blocked - DRH"
3.3
Zmiana parametru niedopuszczalna
(aktywna funkcja
DRH
w menu fabrycznym)
"Writting error"
4.1
Errors during date transmission to sprinter or
computer
" Parity error"
4.2
" Frame error"
4.3
"Stopped transmission
CTS"
4.4
"Stopped transmission
XOFF"
4.5
"Incorrect date"
5.1
Faulty date
"Exceed time"
6.1
Exceed admissible time during for an
operation (eg. zero)
Instruction number:
LMI-17-02/05/09/ENG-C
Summary of Contents for CX 165
Page 1: ...Instruction number LMI 17 02 05 09 ENG C Analytical balances CX series...
Page 2: ...2 MAY 2009...
Page 80: ...80...