18
CITIZEN UWP POS Print SDK - Programming Manual
1.5.
Supported Peripheral Devices models
The models of peripheral devices applicable for control with this service are as follows.
For details on the functions of each model, refer to the instruction manual of each peripheral device.
Network I/F or Bluetooth I/F with USB host function is required for peripheral device control.
[Line Display]
Applicable Display
I/F
Product Specification Overview
DSP01-LT
USB
TFT line display
DSP02-LS
USB
STN line display
[Barcode Scanner]
Applicable Display
I/F
Product Specification Overview
SCN01-Z1D
USB
1D barcode scanner
SCN02-Z2D
USB
2D barcode scanner
BC-NL3000U
USB
2D barcode scanner
Check that the scanner to be connected is set as follows. For the setting procedure, refer to the instruction
manual of the peripheral device to be used.
Item
Value
Description
Interface
USB HID Class
Communication protocol
Keyboard
US Keyboard
Keyboard language
Terminator
Enter
Data suffix
About connection to printer
For the connection to the applicable peripheral device, first turn off the printer power and then connect to
a USB port of the corresponding interface shown in the figure below. Next, turn on the printer power, wait
about 30 seconds until the applicable peripheral device becomes ready to use so as to ensure stable
operation, and then execute the control start process of the peripheral device.
The following lists prohibited actions that must not be performed with regard to a peripheral device
connection.
IF2-BT03/IF2-BT04
IF2-EFX2/IF2-WFx6
IF2-WFx5
IF1-EFX2/IF1-WFx6
