4. To start the measurement
POWER
START
MEMORY
SELECT
SYSTILIC
mmHg
DIASTILIC
mmHg
PULSE / min
CH-611C
Press the “Start Switch”.
The wrist cuff pressurizes when the “Start
Switch” is pressed.
When the pressurization is reached to the
set value, air inflation is stopped automati-
cally.
When pressurization is completed, the au-
tomatic exhaust mechanism will gradually
reduce wrist cuff pressure, and the mark
“
Q
” appears indicating that measurement
is in progress.
When a pulse is detected, the pressure
value moves to the lower side of the dis-
play. At this time the mark “
Q
” flashes and
buzzer sounds.
When the diastolic pressure value is de-
tected, the measurement is completed and
buzzer sounds.
Systolic pressure is displayed on the up-
per and diastolic pressure on the lower side
of the display.
2 to 3 seconds after completion of mea-
surements, the mark “
▼
” appears and air
will deflate immediately.
2 or 3 seconds later, pressure value and
pulse appear alternately on the display.
5. Turn power off
Press the “Power Switch” to turn OFF.
POWER
START
MEMORY
SELECT
SYSTILIC
mmHg
DIASTILIC
mmHg
PULSE / m
in
CH-611C
6. Subsequent measurements
When a measurement need to be made
again, just press the “Start Switch” again.
-
Eng 8
-
