Citizen CBM-920II, User Manual

Page: 29 / 58

— 26 —
4.11 Clearing Lamp Status, I/F signal status, error, etc.
Lamp status and I/F signal status in various states of the printer are as shown below.
Error state may vary a little depending on the printer mode.
Note that the some indication and output status may vary depending on the setting of
memory switch.
State Memory switch Return PAPER lamp POWER lamp I/F signal line
RAM error — — — Impossibility BUSY, FAULT
Memory switch error — — — — — — Lights None
Mechanism error MSW-E:0 FEED switch Turning off Lights BUSY, FAULT
MSW-E:1 FEED switch Lights BUSY, FAULT
PNE detection*2 MSW-9:0 PNE clear Lights Lights BUSY, PE *1
MSW-9:1 PNE clear Turning off Lights PE *1
MSW-9:2 PNE clear Lights Lights None
PE detection MSW-E:0 PE clear Lights Lights BUSY, PE
MSW-E:1 PE clear Lights BUSY, PE
Voltage error — — — Impossibility BUSY, FAULT
In auto loading — — — — — — Lights Lights BUSY, PE
PE clear MSW-C:0 FEED switch Lights Lights BUSY
Pressing FEED switch MSW-A:0 — — — Turning off Lights None
MSW-A:1 — — — Turning off Lights BUSY
At power ON MSW-5:1 FEED switch Slow blinking Lights BUSY
Hexadecimal dump setting — — — — — — Lights Lights BUSY
Memory switch setting — — — — — — BUSY
*Item selection — — — — — — Lights Lights BUSY
*1: Subject to memory switch No.8 setting.
*2: PNE does not function when memory switch No. 4 is disabled.