CBM-270 User’s Manual
CITIZEN
51
ESC ! n
[Function]
Collective specifying the printing mode
[Code]
<1B> H <21> H <n>
[Range]
0
£
n
£
255
[Outline]
Printing mode is assigned. Each n bit indicates the following:
Value
Bit
Function
0
1
0
Character Font
Font A
Font B
1
Undefined
2
Undefined
3
High-lighting
Canceled
Specified
4
Double height
Canceled
Specified
5
Double width
Canceled
Specified
6
Undefined
7
Underline
Canceled
Specified
[Caution]
·
With double height and double width being specified simultaneously, double
wide and double high characters are consisted.
·
An underline is attached to the full character width, which, however, is not
attached to the part having been skipped by the horizontal tab. Neither is it
attached to 90
°
-right-turned characters.
·
The underline width is as having been specified by <ESC - >. (The default
setting is 1 dot width. )
·
Specification with this command is invalid to Kanji, except specification and
cancellation of highlighting
·
In case that double wide character and normal character exist in same one line,
the layout of underline is consistent one.
[Default]
n = 0
[See Also]
ESC E, ESC
-
[Sample Program]
LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H00) ; "H" ;
LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H01) ; "H";
LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H08) ; "H";
LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H10) ; "H";
LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H20) ; "H";
LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H80) ; "H";
LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&HB9) ; "H";
LPRINT CHR$ (&HA) ;
END
[Print Results]
