background image

59

Precautions and usage limitations

• A rubber type strap may become stained by dyes or soils found in clothing and other accessories. 

Since these stains may become permanent, take caution when wearing your watch with items that 
may transfer color (articles of clothing, purses, dyed bracelets, etc.). 

• Solvents, moisture and perspiration may cause the strap to deteriorate. Be sure to replace a strap 

that has become dried, brittle, or cracked to prevent loss due to strap failure.

<Temperature>

• The watch may stop or the function of the watch may be impaired in extremely high or low 

temperature. Do not use the watch in places where the temperature is outside the operating 
temperature range as stated in the specifications. 

<Static Electricity>

• The integrated circuits (IC) used in quartz watches are sensitive to static electricity. Please note that 

the watch may malfunction if exposed to intense static electricity.

<Magnetism>

• Analog type quartz watches are powered by a motor that utilizes a small magnet. The operation 

of this motor can be disturbed if the watch is subjected to magnetic items resulting in the 
malfunction of the watch. Do not allow the watch to come into close proximity to magnetic items 
such as “health” bracelets or necklaces, coin trays, latches found in cabinets and refrigerators, 
certain clasps of handbags and cell phone pouches, cell phone speakers, certain sporting 
accessories, MRI equipment, etc.

Summary of Contents for CB1 Series






































































Reviews: