background image

58

Precautions and usage limitations 

CAUTION

Precautions

• Do not adjust the length of the band by yourself. If you fail to perform the work properly, the 

watch may fall off, or an injury may occur during adjustment. Consult the shop where you 
purchased the watch or your nearest Authorized Citizen Service center.

  If you purchase a product which is sold with a special tool for band adjustment, you may carefully 

adjust the band yourself.

• Always wear your watch with the crown pushed in to the normal position. If your crown is a screw 

down type, be sure it is properly screwed down (locked) to the case.

• Do not operate the crown or any buttons when the watch is wet. This may allow the entrance of 

moisture and cause damage to sensitive components.

• If water enters the watch or the watch fogs up and does not clear up even after a long time, consult 

Authorized Service Center for inspection and/or repair.

• If a watch of upgraded water resistance for daily use is immersed in sea water or subjected to 

excessive perspiration, thoroughly rinse with fresh water and wipe completely dry with a soft cloth.

• If seawater enters the watch, place the watch in a box or plastic bag and immediately take it in for repair. 

Otherwise, pressure inside the watch will increase, and parts (crystal, crown, push button, etc.) may 
come off.

Summary of Contents for CB1 Series






































































Reviews: