[Chronograph Reset Display]
Inside paretheses are shown at the time of measurement after 60 minutes
<Display of Time Measurement>
Chronograph shows “Minutes, Seconds and
1/100 second” up to 59 minutes 59 seconds
99 and will change to “Hours, Minutes and
Seconds” after 60 minutes.
14
15
D. Chronograph Mode <CHR>
This chronograph measures up to 23 hours 59 minutes 59 seconds in units of 1/100
second. On reaching 24 hours of elapsed time, it resets to “00 minutes 00 seconds
00” and stops. It can also measure split times (intermediate elapsed time).
60
55
50
45
30
35
40
25
2
0
15
10
05
SELECT
SPLIT
RESET
MODE
W.R.
10bar
LIGHT
START
STOP
SET
CHR
1/100 second
(second)
Seconds
(minute)
(A)
Minutes
(hour)
(M)
(B)
Minute
Second
1/100
second
CHR
[Up to 59 minutes 59 seconds 99]
* If Time Mode is set to 12-hour display system, alarm time also becomes 12-
hour display system. Pay attention to AM/PM and set correctly.
* Alarm time does not change when summertime is set in Time Mode.
* Auto-return to Normal Alarm Display will activate when the watch is left in
adjustment mode for approximately 2 minutes.
* The watch automatically returns to the normal time mode when the alarm
state continues for 2 minutes when in the alarm mode.
* If button (M) is pressed in adjustment mode, display will immediately return
to Normal Alarm Display.
Hour
Minute
Second
CHR
[After 60 minutes]
