8. All-Reset Function
(1) Pull the crown out.
(2) Press the three buttons (A), (B) and (M) simultaneously. (While pressed, there
will be no display.)
(3) Release the buttons. (All the display segments will appear.)
(4) Push the crown in. (At this point, a monitor sound is heard.)
This completes the all-reset operation. Set each mode correctly before using the
watch.
60
55
50
45
30
35
40
25
20
15
10
05
SELECT
SPLIT
RESET
MODE
W.R.
10bar
LIGHT
START
STOP
SET
AM PM
S.T.
SPLIT
CHR
ALM
CAL
TME
TMR
22
23
Crown
(A)
(M)
(B)
7. When These Problems Occur
<The Watch Shows Abnormal Display>
When the battery life is close to expiring, the display or functions may become
abnormal. When these problems occur, replace the battery as soon as possible. In
rare cases, a strong impact etc. may cause the display or functions to become
abnormal (no display, alarm sounds incessantly etc.). In this case, perform the all-
reset operation by referring to “8. All-Reset Function”.
<Following Battery Replacement>
After the battery has been replaced, perform the all-reset operation by referring to
“8. All-Reset Function”.