EN-4
EN-5
CD/MP3 Player
Playing a CD/MP3
This CD.-player can play Audio Discs, CD-R, Mp3 and
CD Rewritables. Do not try to play CD-ROM, CDi, VCD,
DVD or computer CD.
1
Adjust the source selector to CD.
Display: shows
Briefly.
2
To open the CD door, lift the CD door at the edge
marked
OPEN
.
3
Insert a CD,MP3, CD-R or CD-RW with the printed side
Facing up and press the CD door gently close.
4
Press
PLAY/PAUSE
on the set to start playback.
5
To pause playback press
PLAY/PAUSE
. To resume,
Press
PLAY/PAUSE
again.
6
To stop CD playback, press
STOP
.
Note: CD/MP3 play will also stop when:
–
you open the CD compartment;
–
you select RADIO sound source;
–
the CD/MP3 has reached to the end.
Different play modes: Repeat
REPEAT
–
plays the current track continuously
REPEAT ALL
–
plays the entire CD continuously
Programming track numbers
You may store up to 19 tracks in the desired
sequence. If you like, store any track more than once.
1
In the
PROG
mode, press
or
for
your desired track.
2
When your chosen track number appears, press
PROGRAM button
once to store the track.
The display shows
prog
and prog briefly
followed by your selected track number.
3
Repeat steps 1 to 2 to select and store all desired
tracks in this way.
4
To play your program, press
PLAY/PAUSE
.
Erasing a program
You can erase the contents of the memory by:
–
opening the CD door;
–
selecting
RADIO
source;
–
pressing
STOP
(twice during playback or in the stop
Position)
- - -
CD/MP3 PLAYER
Selecting a different track
During playback you can use
or
to
select a particular track.
•
If you have selected a track number in the stop or
pause position, press
PLAY/PAUSE
to start playback.
•
Press
once to begining of the next track,
or press repeatedly until the desired track number
appears in the display.
•
Press
once to skip back to the begining of the
current
track.
Precautions & General Maintenance
•
Place the set on a hard and flat surface so that the
system does not tilt.
•
Do not expose the set, batteries or CDs to
humidity, rain, sand or excessive heat caused by
heating equipment or direct sunlight.
•
Do not cover the set. Adequate ventilation with a
minimum gap of 6 inches between the ventilation
holes and surrounding surfaces is necessary to
prevent heat build-up.
•
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
•
To clean the set, use a soft dry cloth. Do not use
any cleaning agents containing alcohol, ammonia,
benzene or abrasives as these may harm the
housing.
CD player and CD handling
•
The lens of the CD player should never be touched!
•
Sudden changes in the surrounding temperature can cause condensation to form and the lens of your CD player to
cloud over. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment
until the moisture evaporates.
•
Always close the CD door to keep the CD compartment dust-free. To clean, dust the compartment with a soft dry cloth.
•
To clean the CD, wipe in a straight line from the centre towards the edge using a soft, lint-free cloth. Do not use cleaning
agents as they may damage the disc.
•
Never write on a CD or attach any stickers to it.
MAINTENANCE & SAFETY
X
Reviewing your set program
•
In the
STOP
mode, press
PROGRAM button
.
The display shows your stored track numbers
in sequence.
Press twice to skip back to the
begining of the
p
revious track.
