BD2-2860 User’s Manual
CITIZEN
53
ESC a n
[Function]
Aligning the characters
[Code]
<1B>H<61>H<n>
[Range]
{0 =< n =< 2} Data is described in Hex code.
[Outline]
All the printed data within one line are aligned in the specified position.
•
Depending on n value, positional alignment is carried out as in the table below:
n (Hex)
Position
0
Left end alignment
1
Centering
2
Right end alignment
[Caution]
•
This is valid only when n is inputted at the beginning of line.
•
The initial value of n is "0".
[Sample Program]
LPRINT CHR$ (&H1B) + "a" + CHR$ (0);
LPRINT "AAAAA" + CHR$ (&HA);
LPRINT CHR$ (&H1B) + "a" + CHR$ (1);
LPRINT "AAAAA" + CHR$ (&HA);
LPRINT CHR$ (&H1B) + "a" + CHR$ (2);
LPRINT "AAAAA" + CHR$ (&HA);
[Print Results]
Summary of Contents for BD2-2860
