7
5.6 Notes on DMX operation
Each DMXed unit will occupy a unique DMX address on the DMX chain. By adjusting the
dip switches on the side of the DMX control box, the user may assign one address to the
machine, giving you on/off control with one DMX channel (there is no timer on this DMX).
Step 1).
Attach the DMX 5 pin plug to the upper remote female connector located on
the back of the hazer.
Step 2).
The DMX address is configured by adding the dip switch numbers together
to total the number required. For example, DipSwitch 1 + 6 = 33. Your DMX channel
would be 33.
Dip Switch 1
2
3
4
5
6
7
8
9
Channel #
1
2
4
8
16
32
64
128 256
When you move the slide control or digital control, the unit will turn on at approximately
the 50% setting.
“Input” and “Output” designations on the DMX 5-pin XLR connectors are arbitrary (i.e.,
you can use the input plug for output and visa-versa). It is not necessary to attempt
converting your DMX line’s connector to female/male to match the appropriate socket on
the plug. As long as it is looped in/out, it will work.
6.
Service and Maintenance
Care of your StarHazer II
T M
will give you years of service.
Note: cleaning your unit is going to pay off in constant
good performance.
1. When finished, wipe machine with a clean cloth and store covered to prevent dust and
dirt from accumulating on the machine. Clean any spilled fluid from spout area.
2. Reusing this fluid requires filtering through a nylon. Always check used fluid for clarity.
3. Periodically vacuum dust from fan filter. If filter becomes clogged, change or wash in
soapy water by popping off filter cover, removing filter foam, and then replacing.
4. Observe the filter foam on the front of the machine. If it appears that it is clogged or dirty,
it must be cleaned with soapy water. Remove first by sliding it out from under the hold-
down screws. Wash. Dry. Replace.
5.
Do not transport or ship with fog fluid inside the machine. If shipping by a common
carrier,
you must empty all fluid from the unit
by tipping upside down and moving
clockwise over a drain basin. Put unit in a plastic bag to prevent dripping in box. Most
carriers will return leaking units.
7.
Technical Data
STARHAZER II
TM
Technical Data P/N 100033 (230V P/N 100038)
Type of Haze
Odorless, even, transparent, long-lasting
High Performance Fluid P/N 150660
