4 |
www.
cistermiser
.co.uk
400mm
Water supply
8mm AF
Spanner
Installation of external valve tap
The tap can be mounted on any horizontal
surface up to 40mm thick. It requires a hole
of 32.5-36mm diameter.
How to change the nozzle
Use the nozzle tool to unscrew the 5 litre
(blue) nozzle. Insert the 3.5 litre (blue)
nozzle and tighten until flush with tap body;
no part should be protruding from the
end of the tap. Ensure the nozzle is not
over-tightened as this may pinch the “O”
ring and cause the tap to leak.
NOTE:
Use extension
cable where
necessary. Ensure
correct polarity is
maintained; connect
orange lead to
orange leads and
blue leads to blue
leads.
Requires 4 x AA (LR6)
alkaline batteries
Requires 1A
fused spur
Multi product power supply unit (not supplied).
Suitable for powering up to 20 units.
Power options
OR
OR
NOTE:
Flush pipework prior to installation.
Do not install opposite a mirror.
Minimum 0.5 Bar dynamic pressure.
NOTE:
Ensure
filter is
fitted to the
inlet of the
solenoid
valve.
x 4
x 4
OR
