Page 18
Information subject to change without notice.
ASSEMBLING OF THE PACKING BETWEEN HYDRAULIC AND
AIR CYLINDER PART
(Figure 7)
Fix BACK-UP RING 30084 on the seat at the bottom of the preliminary assembled
cylinder part; the flat side has to be directed downward and press this with the aid of
tool “J”.
Then fix O-RING 30082 and now mount the next BACK-UP RING 30084 directed with
the hollow side to the O-Ring, after which all parts can be locked away by means of
RING 18846. Use tool “K” for this purpose.
Put some oil on the preliminary assembled PISTON ROD 18847 and on the inner side
of the BOOSTER AIR CYLINDER 205.
Now press the piston rod through the back-up rings upwards.
Mount successively Spring Holder 199882, Spring 50209, Plunger 10520, Booster
Valve 10306, and guard the latter by means of a cotter pin.
The lower side of the hole in PISTON ROD 18847 and the lower side of the groove in
PLUNGER 10306 must be in line with each other (see point A).
Summary of Contents for BOOSTERMAN386
