Cisco WUSB54GSC User Manual Download Page 51 | Manualshive

Page: 51 / 57

background image

Compact Wireless-G USB Network Adapter with SpeedBooster

Appendix H: Regulatory Information

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference that may cause
undesired operation.

This product has been tested and complies with the specifications for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference ina residential installation. This equipment
generates,

uses, and can radiate radio frequency energy and,

if not installed and used according to the instructions, maycause harmful interference to radio
communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this equipment doescause harmful interference to radio or
television reception,which is found by turning the equipment off

and on, the user is encouraged to try to correct the interference by

one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment or devices

• Connect the equipment to an outlet other than the receiver's

• Consult a dealer or an experienced radio/TV technician for assistance

FCC Caution: Any changes or modifications not expressly

approved by the party responsible for

compliance could

void the user’s authority to operate this equipment.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment.

End user

smust follow the specific operating instructions for

satisfying RF exposure compliance. To maintain compliance with

FCC RF exposure compliance

requirements, please follow

operation instruction as documented in

this manual. This transmitter must not be co-located or operating inconjunction with any other antenna
or transmitter.

SAR compliance has been established in typical laptop

computer(s) with USB slots, and

this product

can be used in a typical laptop computer

with USB slots. Other applications such as a handheld PC or similar device has not been

verified and

may not comply with related RF

exposure

rules and such use shall be prohibited.

Safety Notices:

Caution: To reduce the risk of fire, use only No.26 AWGor larger telecommunication line cord.

Do not use this product near water, for example, in awet basement or near a swimming pool.

Avoid using this product during an electrical storm.There may be a remote risk of electric shock
fromlightning.

Use only with UL-listed Information TechnologyEquipment (ITE).

Industry Canada Statement:

This Class B digital apparatus complies with Canadian

ICES-003 and RSS210.

Operation is subject to the following two conditions: (1) This device may not cause interference and (2)
This device must accept any interference,

including

interference that may cause undesired operation ofthe device.

Appendix H: Regulatory Information

45

!

«
...
49
50
51
52
53
...
»

Summary of Contents for WUSB54GSC


























































Reviews:

No comments

Related manuals for WUSB54GSC

Brand: j5 create Pages: 444

Brand: Digitus Pages: 6

Brand: ZyXEL Communications Pages: 28

XAV1501 - Powerline AV+ 200 Adapter

Brand: NETGEAR Pages: 2

Brand: Hama Pages: 20

Brand: Silvercrest Pages: 13

Brand: Adaptec Pages: 50

Brand: i-tecc Pages: 28

Brand: i-tec Pages: 48

Brand: Manhattan Pages: 2

Brand: Cyber Acoustics Pages: 6

Brand: OPTOGAMA Pages: 25

Brand: Encore Pages: 2

Brand: Encore Pages: 24

Brand: Encore Pages: 28

Brand: Encore Pages: 42

Brand: Prudent Way Pages: 8

Brand: Sonnet Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands