Cisco WUSB54GS User Manual Download Page 47 | Manualshive

Page: 47 / 48

background image

42

Appendix G: Regulatory Information

Wireless-G USB Network Adapter with SpeedBooster

Appendix G: Regulatory Information

FCC STATEMENT

This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used according to the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which is found by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment or devices

Connect the equipment to an outlet other than the receiver's

Consult a dealer or an experienced radio/TV technician for assistance

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Linksys declares that WUSB54GS ver. 2, ( FCC ID: Q87-WUSB54GSV2 ) is limited in CH1~CH11 for 2.4 GHz by specified firmware controlled in U.S.A.".

INDUSTRY CANADA (CANADA)

This Class B digital apparatus complies with Canadian RSS210.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The use of this device in a system operating either partially or completely outdoors may require the user to obtain
a license for the system according to the Canadian regulations.

Operation is subject to the following two conditions:

1) This device may not cause interference and

2) This device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.

«
...
45
46
47
48
»

Summary of Contents for WUSB54GS

















































Reviews:

No comments

Related manuals for WUSB54GS

Brand: Targus Pages: 10

Token-Ring Network PC Adapter

Brand: IBM Pages: 118

Brand: Mercusys Pages: 59

Brand: Edimax Pages: 4

Brand: Clarion Pages: 1

Brand: StarTech.com Pages: 10

Brand: Hama Pages: 74

Thunderbolt MTB3-002-HD

Brand: Tripp Lite Pages: 31

Brand: WiT Pages: 11

Brand: TP-Link Pages: 32

Brand: RCWARE Pages: 3

TRIPP LITE U444-06N-DP4K6B

Brand: Eaton Pages: 4

Brand: 3idee Pages: 7

Brand: Velleman Pages: 18

Smart Wireless THUM Adapter

Brand: Emerson Pages: 28

Brand: Emerson Pages: 48

Smart Wireless THUM Adapter

Brand: Emerson Pages: 62

WorkForce 600 Series

Brand: Epson Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands