21
Chapter 5: Using the Wireless Network Monitor
Creating a New Profile
Wireless-G USB Network Adapter with SpeedBooster
Creating a New Profile
1. On the
Profiles
screen, click the
New
button to create a new profile.
2. Enter a name for the new profile, and click the
OK
button. Click the
Cancel
button to return to the
Profiles
screen without entering a name.
3. The
Network Settings
screen will appear. If your network has a router or other DHCP server, click the radio
button next to
Obtain network settings automatically (DHCP)
. Click the
Next
button to continue, or click
the
Cancel
button to return to the
Profiles
screen.
If your network does not have a DHCP server, click the radio button next to
Specify network settings
. Enter
an IP Address, Subnet Mask, Default Gateway, and DNS address appropriate for your network. You must
specify the IP Address and Subnet Mask on this screen. If you are unsure about the Default Gateway and DNS
address, leave these fields empty. Click the
Next
button to continue, or click the
Cancel
button to return to
the
Profiles
screen.
IP Address
- This IP Address must be unique to your network.
Subnet Mask
- The Adapter’s Subnet Mask must be the same as your wired network’s Subnet Mask.
Default Gateway
- Enter the IP address of your network’s Gateway here.
DNS 1
and
DNS 2
- Enter the DNS address of your wired Ethernet network here.
Figure 5-13: Create a New Profile
Figure 5-14: Enter Profile Name
Figure 5-15: Network Settings for New Profile
