Router Card (WS-X3011) Configuration Note 17
Access the Router Card Command-Line Interface
Note
The default parameters for the internal console port on the router card are 9600
baud, 8 data bits, no parity, and 1 stop bit. This default baud rate matches the switch
console baud rate. Do not change the default baud rate. If it has been changed, press
Ctrl-B to toggle through the available baud rates to restore the default.
Although the router card CLI is based on the Cisco IOS CLI, pressing Ctrl-B does not
function as a backspace key as it normally does in the Cisco IOS CLI; instead, it is used
to change the console baud rate.
Step 2
Power ON the switch. The switch Greeting screen appears (Figure 8).
Step 3
Access the router card CLI by pressing Ctrl-R from the switch Main menu.
Note
You can toggle back and forth between the two CLIs by pressing Ctrl-R.
