Cisco WAP4410N - Small Business Wireless-N Access Point, Administration Manual

Page: 64 / 92

Configuring the WAP4410N Wireless-N Access Point
Administration
WAP4410N Wireless-N Access Point with Power Over Internet 55
6
-
E-Mail Address for Logs —Enter the e-mail address that will receive
logs.
-
Log Queue Length —Enter the length of the log that will be e-mailed to
you. The default is 20 entries.
-
Log Time Threshold —Enter how often the log will be emailed to you.
The default is 600 seconds (10 minutes).
•
Syslog Notification— Syslog is a standard protocol used to capture
information about network activity. The access point supports this protocol
and sends its activity logs to an external server. To enable Syslog, click
Enabled . The default is Disabled .
-
Syslog Server IP Address —Enter the IP address of the Syslog server. In
addition to the standard event log, the access point can send a detailed
log to an external Syslog server. The access point’s Syslog captures all
log activities and includes this information about all data transmissions:
every connection source and destination IP address, IP server, and
number of bytes transferred.
•
Log— Select the events that you want the access point to keep a log.
-
Unauthorized Login Attempt —If you want to receive alert logs about
any unauthorized login attempts, click this check box.
-
Authorized Login —If you want to log authorized logins, click this check
box.
-
System Error Messages —If you want to log system error messages,
click this check box.
-
Configuration Changes —If you want to log any configuration changes,
click the check box.
-
View Log —If you want to see the logs, click the button.
STEP 3
Click Save .