Configuring the WAP4410N Wireless-N Access Point
Administration
WAP4410N Wireless-N Access Point with Power Over Internet
52
6
Configuring Administration Settings
The Administration > Management page allows you to configure the password,
Web Access, and SNMP settings. You should change the username/password
that controls access to the access point’s web-based utility to prevent
unauthorized access.
To change the management settings of the access point, follow these steps:
STEP 1
Click
Administration > Management
.
STEP 2
Configure the management settings.
•
Local AP Password
-
User Name
—Modify the administrator user name. The default is
admin
.
-
AP Password
—Modify the administrator password for the access
point’s web-based utility. The default is
admin
.
-
Re-enter to confirm
—Confirm the new password by entering it again in
this field.
