Cisco WAP4410N - Small Business Wireless-N Access Point Administration Manual Download Page 26

Page: 26 / 92

Setting Up the WAP4410N Wireless-N Access Point

Navigating the Utility

WAP4410N Wireless-N Access Point with Power Over Internet

Status

This screen allows you to view status information about your local network,
wireless networks, and network performance.

•

Local Network

—Displays system information, including software and

hardware versions, MAC address, and IP address on the LAN side of the
access point.

•

Wireless

—Displays wireless network settings including SSID, network

mode, priority setting, VLAN trunk, and wireless channel.

•

System Performance

—Displays the current traffic statistics of this access

point for both wireless and LAN ports.

Summary of Contents for WAP4410N - Small Business Wireless-N Access Point





























































































Search results

Summary of Contents for WAP4410N - Small Business Wireless-N Access Point

Reviews:

Related manuals for WAP4410N - Small Business Wireless-N Access Point

Brands by name

Popular brands

Cisco WAP4410N - Small Business Wireless-N Access Point, Administration Manual

Search results

Summary of Contents for WAP4410N - Small Business Wireless-N Access Point

Reviews:

Related manuals for WAP4410N - Small Business Wireless-N Access Point

Brands by name

Popular brands