Chapter 4 Installing Hardware Options
Installing DIMMs
4-8
Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide
OL-9137-02
Caution
When you handle static-sensitive devices, take precautions to avoid damage from
static electricity.
To install a DIMM, follow these steps:
Step 1
Review the safety information in the
“Safety Guidelines” section on page 2-4
.
Step 2
Power off the device and peripheral devices. Disconnect the power cord, and then
disconnect all external cables. Remove the cover. (See the
“Removing the Cover
and Bezel” section on page 4-1
for details.
Step 3
Touch the static-protective package that contains the DIMM to any unpainted
metal surface on the device, and then remove the DIMM from the package.
Step 4
Install the DIMM:
a.
Open the retaining clip on each end of the DIMM connector. Turn the DIMM
so that the pins align correctly with the connector. (See
Figure 4-5
.)
Figure 4-5
Installing a DIMM
151929
2
1
1
DIMM 1
2
DIMM 3
