Cisco vEdge 100, Hardware Installation Manual

Page: 234 / 260

Description Signal Pin
Module transmitter fault TX_Fault 2
Transmitter disable TX_Disable 3
Two-wire serial interface data line SDA 4
Two-wire serial interface clock SCL 5
Module absent MOD_ABS 6
Rate select 0; optionally controls SFP+ module receiver RS0 7
Receiver loss of signal indication RX_LOS 8
Rate select 1; optionally controls SFP+ transmitter RS1 9
Module receiver ground VeeR 10
Module receiver ground VeeR 11
Receiver inverted data output RD- 12
Receiver non-inverted data output RD+ 13
Module receiver ground VeeR 14
Module receiver 3.3-V supply VccR 15
Module transmitter 3.3-V supply VccT 16
Module transmitter ground VeeT 17
Transmitter non inverted data input TD+ 18
Transmitter inverted data input TD- 19
Module transmitter ground VeeT 20
Network Port LEDs
Each network port on the vEdge 5000 router has two LEDs—the activity LED and the link LED. See Figures
1 through 3.
Figure 1: LEDs on the 8x1GE Copper Rj45 NIM
Hardware Installation Guide for vEdge Routers
228
vEdge 5000 Router
Ports and Connectors