manualshive.com logo in svg

Cisco Unified IP Conference Phone 8831, User Manual, Page: 63 / 88

Share
Download
Cisco Unified IP Conference Phone 8831 User Manual Download Page 63

Turn DND On and Off

Procedure

Step 1

Press

DND

to turn on DND.

Visual confirmation displays briefly.

Step 2

Press

DND

again to turn off DND.

Visual confirmation displays briefly.

Enhanced Room Coverage

Optional microphone extension kits provide enhanced room coverage that can be further expanded by linking
two units together in Linked Mode. This feature allows you to use the conference station in a larger room, or
to enhance the audio and voice experience for larger groups of in-person attendees.

The Cisco Unified IP Conference Phone 8831 supports wired and wireless microphones. The Cisco Unified
IP Conference Phone 8831NR supports only wired microphones.

When two conference station base units are linked together to expand the audio coverage area, one conference
station acts as the primary device and the other sound base is the dependant or secondary device. In Linked
Mode, the primary base station supports one or two wireless microphones, or it supports one wired microphone.
The secondary unit supports only one wired microphone; a wireless microphone cannot be connected to a
secondary Sound Base. You cannot mix microphone types on the devices. Consult the following tables for
allowable configurations.

Table 15: Deployment Configurations for Enhanced Room Coverage with a Single Phone

Wireless Extension Microphone

Wired Extension Microphone

--

1 or 2

Number and type of
connected microphones

1 or 2

--

Table 16: Deployment Configurations for Enhanced Room Coverage in Linked Mode

Secondary Sound Base

Primary Sound Base

--

--

Wired Extension
Microphone

1

--

Wired Extension
Microphone

--

1

Wired Extension
Microphone

1

1

Wired Extension
Microphone

--

--

Wireless Extension
Microphone

Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager

53

Calling Features

Turn DND On and Off

Summary of Contents for Unified IP Conference Phone 8831

























































































Reviews:

No comments