3-4
Cisco UCS C260 Server Installation and Service Guide
OL-24342-01
Chapter 3 Maintaining the Server
Status LEDs and Buttons
Rear Panel LEDs and Buttons
Figure 3-2
shows the rear panel LEDs and buttons.
Figure 3-2
Rear Panel LEDs and Buttons
Power supply status
•
Green—All power supplies are operating normally.
•
Amber, steady—One or more power supplies are in a degraded operational state.
•
Amber, blinking—One or more power supplies are in a critical fault state.
Network link activity
•
Off—The Ethernet link is idle.
•
Green—One or more Ethernet LOM ports are link-active.
•
Green, blinking—One or more Ethernet LOM ports are link-active, with activity.
Table 3-1
Front Panel LEDs, Definitions of States (continued)
LED Name
State
1
Power supply status
6
10-Gb Ethernet link speed
(present only if 10-Gb module is installed)
2
Power supply fault
7
1-Gb Ethernet link speed
3
10/100 Ethernet link speed
8
1-Gb Ethernet link status
4
10/100 Ethernet link status
9
Rear Identification button/LED
5
10-Gb Ethernet link status
(present only if 10-Gb module is installed)
–
330596
9
7
8
5
6
1
2
3
4
