Cisco UCS C24 M3 Manual Download

Page: 7 / 58

Cisco UCS C24 M3 High-Density SFF Rack-Mount Server

BASE SERVER STANDARD CAPABILITIES and FEATURES

External Storage

Devices

■

A 16 GB USB 2.0 drive (if ordered) comes as a separate item in the

shipping box and contains preloaded drivers and utilities. You can move

the 16 GB drive from one server to another an using external USB 2.0

connector in order to install the drivers and utilities onto multiple

servers.

Video

The Emulex Pilot 3 Integrated Baseboard Management Controller provides
video:

■

Matrox G200e video controller

■

Integrated 2D graphics core with hardware acceleration

■

Supports all display resolutions up to 1920 x 1200 x 16 bpp resolution at

60 Hz

■

24-bit color depth for all resolutions less than 1600x1200

■

Up to 256 MB video memory

Interfaces

■

Rear panel

• One DB9 serial port connector
• Four USB 2.0 port connectors
• One DB15 VGA connector
• One 10/100/1000 Ethernet management port
• Two 1 GbE Ethernet LOM ports

■

Front panel

• Two USB 2.0 ports

Front Panel

■

A front panel controller provides status indications and control buttons

Power subsystem

One or two power supplies, depending on server configuration and loading.

Power supplies available are 450 W or 650 W (no mixing). With two power

supplies, 1 + 1 redundancy is provided if the load can be carried with one

supply. Prior to making a power supply selection, the UCS Power Calculator

should be run to determine the right size power supply for your server

configuration. The UCS Power Calculator can be found at the following link:

https://express.salire.com/Go/Cisco/Cisco-UCS-Power-Calculator.aspx

Fans

Chassis:

■

Four hot-swappable fans for front-to-rear cooling. N + 1 redundant.

Power supply:

■

The power supplies are equipped with fans.

Integrated management

processor

Cisco Integrated Management Controller (CIMC).
Depending on your CIMC settings, the CIMC can be accessed through the 1-Gb

Ethernet dedicated management port, the 1-Gb Ethernet LOM ports, or a

Cisco 1225 virtual interface card.

Notes . . .

1. NCSI = network communications services interface protocol. The slot stays active when the server is in standby

power state.

2. CNIC = Cisco network interface card.

Capability/Feature

Description

Summary of Contents for UCS C24 M3



























































Search results

Summary of Contents for UCS C24 M3

Reviews:

Related manuals for UCS C24 M3

Brands by name

Popular brands

Cisco UCS C24 M3, Manual

Search results

Summary of Contents for UCS C24 M3

Reviews:

Related manuals for UCS C24 M3

Brands by name

Popular brands