42
Step 4
Test the PSTN by using a cell phone to place a call to a Cisco Unified IP phone that is
connected to this Cisco Unified 500 Series.
Step 5
Test the AA and voice mail by using a cell phone to place a call to an unattended
Cisco Unified IP phone that is connected to this Cisco Unified 500 Series.
a.
Listen for the AA greeting.
b.
Press the extension number for the target phone and listen for the voice-mail greeting.
c.
Leave a test message.
d.
Go to the phone that you called. Verify that the [Message] indicator is lit.
e.
Press the [Message] button on a phone and retrieve the voice-mail message.
Step 6
If appropriate, repeat the previous steps using devices connected to the Cisco Catalyst
Express 520.
12
Modify the Software Configuration
This section contains the following topics:
•
Information About the Software Configuration, page 42
•
Default Software Configuration, page 43
•
System Management Tools, page 44
•
•
Configure Localization Support, page 46
•
Install Cisco Configuration Assistant, page 48
•
Log Into Cisco Unified CME and Cisco Unity Express GUI, page 49
•
Log Into Cisco Unified CME Phone User Page, page 50
Information About the Software Configuration
This section contains the following topics:
•
Default Software Configuration, page 43
•
System Management Tools, page 44
•
