manualshive.com logo in svg

Cisco UC520-8U-4FXO-K9, Getting Started

Share
Download
Cisco UC520-8U-4FXO-K9 Getting Started Download Page 48

48

Prerequisites

•

The Cisco Configuration Assistant is installed on a PC or laptop to be connected to the
Cisco Unified 500 Series. For information, see the Getting Started with Cisco Configuration
Assistant at

http://www.cisco.com/go/configassist

or on the CD-ROM that shipped with the

product.

Step 1

Go to the Download Software site at

http://www.cisco.com/en/US/products/ps7293/tsd_products_support_series_home.html

. You

must have an account on Cisco.com to access the Software Center. If you do not have an
account or have forgotten your username or password, click Cancel at the login dialog box
and follow the instructions that appear.

Step 2

Select the language that you want to install. Each language pack contains files for a specific
language and country and uses the following naming convention:

cue-vm-language_country-lang-pack.version.prt1

For example, cue-vm-de_DE-lang-pack.2.3.2.prt1 is German for Germany for Cisco Unity
Express 2.3.2.

Step 3

Download the language pack to the \Program Files\Cisco Configuration
Assistant\appdata\phoneload folder on the PC or laptop on which the Cisco Configuration
Assistant is installed. Each pack contains all language data and prompt files associated with
the associated version of Cisco Unity Express with Voice Mail feature application.

Step 4

Launch the Cisco Configuration Assistant. For information, see the Getting Started with
Cisco Configuration Assistant document at

http://www.cisco.com/go/configassist

or on the

CD-ROM that shipped with product.

Step 5

Using a RJ-45 to RJ-45 Ethernet cable, connect the Ethernet port of the PC on which the Cisco
Configuration Assistant is installed to a PoE port on the front panel of the Cisco Unified
500 Series.

Step 6

Use the Cisco Configuration Assistant to configure a voice mail language. For information,
see online help.

Install Cisco Configuration Assistant

To install Cisco Configuration Assistant on a PC to be used to customize the software configuration
on a Cisco Unified 500 Series, perform the following steps.

Summary of Contents for UC520-8U-4FXO-K9























































Reviews:

No comments

Brands by name

Popular brands

Load more brands