11
Unified Communications UC 320W Administration Guide
106
Reviewing the Settings and Applying the
Configuration
After you enter your settings, review the Site Summary and apply the
configuration.
Refer to these topics:
•
•
Applying the Configuration, page 107
Site Summary
Use the
Site Summary
page to review the settings from each module of the
configuration utility.
TIP
Opening this page: From the navigation pane, choose
Apply Changes > Site
Summary
.
•
Position your mouse pointer over a tab to view the full label. Click the tab to
view a summary of the settings from the specified module.
•
On each page, the settings appear in black type. Blue type indicates a link
that you can click to return to a particular configuration page.
•
Remember that the settings are not applied to the devices until you apply
all changes on the
Apply Configuration
page. If you wish to exit without
applying your configuration, you can use the
Backup/Save Session
link to
save your session for later use. For more information, see
Configuration or Saving a Session, page 45
.
