Cisco uBR924 Troubleshooting Tips Download Page 57

Page: 57 / 74

show controllers cable-modem tuner

Troubleshooting Tips for the Cisco uBR924 Cable Access Router 57

Table 9

Show Controllers Cable-Modem Tuner Field Descriptions

Related Commands

Field

Description

tuner_freq

Indicates the current downstream frequency.

symbol_rate

Indicates the downstream symbol rate in symbols per second.

local_freq

Frequency on which the transmitter and tuner communicate.

snr_estimate

Signal to noise estimate in dB X 1000.

ber_estimate

Bit error rate estimate (always 0).

lock_threshold

Minimum signal-to-noise ratio (SNR) that the Cisco uBR924 will accept as a valid lock.

QAM status

Indicates if QAM/FEC lock has been acquired and the modulation mode in use.

tx_freq

Upstream frequency sent to the Cisco uBR924 by the CMTS in the UCD message.

power_level

Transmit power level as set in the hardware, given as a hexadecimal value. The units are
unique to the hardware used. Use the show controllers cable-modem 0 mac state
command to see the power level in dBmV.

symbol_rate

Indicates the upstream symbol rate in symbols per second that is negotiated
between the CMTS and the cable access router.

Command Description

show controllers cable-modem

Displays high-level controller information about a Cisco
uBR924 cable access router.

show controllers cable-modem bpkm

Displays information about the baseline privacy key
management exchange between the Cisco uBR924 and the
CMTS.

show controllers cable-modem des

Displays information about the Data Encryption Standard
(DES) engine registers.

show controllers cable-modem filters

.Displays the registers in the MAC hardware that are used for
filtering received frames.

show controllers cable-modem
lookup-table

Displays the mini-slot lookup table inside a Cisco uBR924.

show controllers cable-modem mac

Displays detailed MAC-layer information for a Cisco uBR924.

show controllers cable-modem phy

Displays the contents of the registers used in the downstream
physical hardware of the Cisco uBR924.

Summary of Contents for uBR924











































































Search results

Summary of Contents for uBR924

Reviews:

Related manuals for uBR924

Brands by name

Popular brands

Cisco uBR924, Troubleshooting Tips

Search results

Summary of Contents for uBR924

Reviews:

Related manuals for uBR924

Brands by name

Popular brands