Cisco uBR924 Troubleshooting Tips Download Page 15 | Manualshive

Page: 15 / 74

background image

Step 4—Interpret the MAC Log File and Take Action

Troubleshooting Tips for the Cisco uBR924 Cable Access Router 15

The search table is arranged so that the first frequencies tried are above 450 MHz. Because many
CATV systems have been upgraded from 450 MHz to 750 MHz coaxial cable, digital channels have
a high chance of being assigned in the new spectrum. The search table omits channels below 90 MHz
and above 860 MHz since the DOCSIS specification does not mandate their coverage.

Some CATV systems use alternative frequency plans such as the IRC (Incrementally Related
Carrier) plan and HRC (Harmonically Related Carrier) plan. Cisco cable access routers support both
of these plans. Most of the IRC channel slots overlap the EIA plan.

Event 3—Obtain Upstream Parameters

The Cisco uBR924 waits for an upstream channel descriptor (UCD) message from the headend
CMTS. The UCD provides transmission parameters for the upstream channel.

508146.124 CMAC_LOG_STATE_CHANGE wait_ucd_state

508147.554 CMAC_LOG_UCD_MSG_RCVD 3

508147.558 CMAC_LOG_UCD_NEW_US_FREQUENCY 20000000

508147.558 CMAC_LOG_SLOT_SIZE_CHANGED 8

508147.622 CMAC_LOG_FOUND_US_CHANNEL 1

508147.624 CMAC_LOG_STATE_CHANGE wait_map_state

508148.058 CMAC_LOG_MAP_MSG_RCVD

508148.060 CMAC_LOG_INITIAL_RANGING_MINISLOTS 40

Event 4—Start Ranging for Power Adjustments

The ranging process adjusts the transmit power of the cable access router. The Cisco uBR924
performs ranging in two stages: ranging state 1 and ranging state 2.

The

CMAC_LOG_POWER_LEVEL_IS

field is the power level that the CMTS told the Cisco uBR924 to

adjust to. The

CMAC_LOG_RANGING_SUCCESS

field indicates that the ranging adjustment was

successful.

508148.062 CMAC_LOG_STATE_CHANGE ranging_1_state

508148.064 CMAC_LOG_RANGING_OFFSET_SET_TO 9610

508148.066 CMAC_LOG_POWER_LEVEL_IS 28.0 dBmV (commanded)

508148.068 CMAC_LOG_STARTING_RANGING

508148.070 CMAC_LOG_RANGING_BACKOFF_SET 0

508148.072 CMAC_LOG_RNG_REQ_QUEUED 0

508148.562 CMAC_LOG_RNG_REQ_TRANSMITTED

508148.566 CMAC_LOG_RNG_RSP_MSG_RCVD

508148.568 CMAC_LOG_RNG_RSP_SID_ASSIGNED 2

508148.570 CMAC_LOG_ADJUST_RANGING_OFFSET 2408

508148.572 CMAC_LOG_RANGING_OFFSET_SET_TO 12018

508148.574 CMAC_LOG_ADJUST_TX_POWER 20

508148.576 CMAC_LOG_POWER_LEVEL_IS 33.0 dBmV (commanded)

508148.578 CMAC_LOG_STATE_CHANGE ranging_2_state

508148.580 CMAC_LOG_RNG_REQ_QUEUED 2

508155.820 CMAC_LOG_RNG_REQ_TRANSMITTED

508155.824 CMAC_LOG_RNG_RSP_MSG_RCVD

508155.826 CMAC_LOG_ADJUST_RANGING_OFFSET -64

508155.826 CMAC_LOG_RANGING_OFFSET_SET_TO 11954

508155.828 CMAC_LOG_RANGING_CONTINUE

508165.892 CMAC_LOG_RNG_REQ_TRANSMITTED

508165.894 CMAC_LOG_RNG_RSP_MSG_RCVD

508165.896 CMAC_LOG_ADJUST_TX_POWER -9

508165.898 CMAC_LOG_POWER_LEVEL_IS 31.0 dBmV (commanded)

508165.900 CMAC_LOG_RANGING_CONTINUE

508175.962 CMAC_LOG_RNG_REQ_TRANSMITTED

508175.964 CMAC_LOG_RNG_RSP_MSG_RCVD

508175.966 CMAC_LOG_RANGING_SUCCESS

«
...
13
14
15
16
17
...
»

Summary of Contents for uBR924











































































Reviews:

No comments

Related manuals for uBR924

Brand: NavigateWorx Pages: 71

Storagelibrary T24

Brand: Tandberg Data Pages: 28

Brand: Rosewill Pages: 3

Brand: Freund Pages: 6

Brand: ZyXEL Communications Pages: 79

Brand: SriHome Pages: 12

Brand: Hawking Pages: 21

TGXPS-1080-M12-MV Series

Brand: ORiNG Pages: 2

Brand: TRENDnet Pages: 2

Brand: TRENDnet Pages: 2

Brand: NetComm Pages: 75

Brand: Proscend Pages: 93

Brand: Thecus Pages: 90

Brand: Hanwha Vision Pages: 131

Brand: ROBOfiber Pages: 2

Brand: Billion Pages: 12

Brand: D-Link Pages: 60

uBR10-LCP2-MC28C

Brand: Cisco Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands