manualshive.com logo in svg

Cisco TelePresence Touch 8, Installation Manual, Page: 4 / 8

Share
Download
Cisco TelePresence Touch 8 Installation Manual Download Page 4

— 4 —

A list of all codecs that are in 

Pairing visibility mode

 is displayed on the touch screen. 

Refresh list

Select codec to pair with

Select codec manually...

IP Settings

System name (Codec type)

[email protected]

The touch screen 

menu and contact list

[email protected]

Product:

Cisco TelePresence System Codec

SIP URI:

[email protected]

H323 id:

[email protected]

Software:

TC4.1.0

IP address:

192.168.1.128

Serial number:

CBA123456789

System name (Codec type)

[email protected]

Start Pairing

Back

Back

5. 

Tap the codec name in the list.

Note: 

If your codec is not in the 

list, read about 

What to do if your 

codec is not listed

 on page 7.

9. 

Verify that the touch screen is successfully paired to your codec by checking the 

codec address displayed in the top banner.

The touch screen is ready to use.

6. 

Review codec details and tap  

Start Pairing

 to start the 

pairing process.

7. 

If required, the touch screen  

downloads and installs new  

software from the codec. The 

touch screen automatically 

restarts after the software 

upgrade. This process may take 

a few minutes.

8. 

If your codec is password 

protected, you will be 

prompted for an administrator 

username and password to 

sign in to the codec. 

Continue when the menu and 

contact list appear on the 

touch screen.

Summary of Contents for TelePresence Touch 8









Reviews:

No comments