47
OL-23393-01
Step 9
Move the left screen in through the open table door.
Step 10
Locate the spade terminals on the rear of the left and right screens, and locate the speaker cables.
Step 11
Connect the speakers to the speaker cables for the left and right screen.
See
for the connection diagram.
Step 12
Slide the right screen into place under the display shelf. See
for the approximate placement.
Note
Do not unscrew the leveling feet and make sure that the kick guard skirt is behind the screen.
Step 13
Align the locating brackets on the underside of the table shelf to the locating plates on the right screen.
Step 14
Raise the leveling feet on the screen so that the top edge of the screen is snug with the underside of the
display shelves.
Note
Do not tighten the leveling feet as you may need to adjust the placement of the screen.
Figure 1-38
Raising the Leveling Feet
Step 15
through
for the left screen, inserting the guide of one kick guard into the slot of
the other kick guard.
Note
Make sure the kick guard skirt is behind the screen and not under any of the leveling feet.
Step 16
Adjust the frames so they are equally distant to the LCD screen making sure they are still aligned with
the locating plates and at the kick guard.
Tip
Move the screens in or out until they are even.
206943
