48
OL-23393-01
Figure 1-39
Adjusting the Screens
Step 17
Tighten the screen up against the display shelves by adjusting the leveling feet with the open-ended
wrench rotating it clockwise.
Step 18
Make sure the tabletops are level, most importantly the table door. If the tabletops are not level, adjust
the leveling feet or move the screen until the tabletops are level.
Step 19
After completing the final adjustments, make sure the locating brackets are still aligned.
Completing the Assembly
This section describes the steps you take to complete the assembly of the screens and display and
includes the following topics:
•
Required Parts and Tools, page 48
•
Completing the Assembly, page 49
Required Parts and Tools
•
1 LCD back cover
•
1 cable sheath
•
3 PDUs
