49
OL-23393-01
Completing the Assembly
To complete the assembly, complete the following steps.
Step 1
Locate the loose cables next to the right screen.
Step 2
Cover the cables by inserting them into the slit of the cable sheath. Make sure the slit faces the opposite
direction of the right screen.
Figure 1-40
Placing the Cables into the Cable Sheath
Step 3
Walk to the back of the Cisco TelePresence screen and locate the speakers on each side of the LCD
screen.
Step 4
Place one grommet of the LCD back cover on the stud on the speaker locating bracket.
Note
The back cover is the shaded item in the following illustrations.
Figure 1-41
Placing the LCD Back Cover Onto the Speaker Locating Bracket
206980
