manualshive.com logo in svg

Cisco SRP 526W, Administration Manual

Share
Download
Cisco SRP 526W Administration Manual Download Page 8

1

Services Ready Platform SRP 500 Series Administration Guide

8

 

Introduction to the Services Ready Platform

This chapter provides information to familiarize you with the product features and 
get started using the web-based Configuration Utility.

•

Feature Overview, page 8

•

Product Overview, page 8

Feature Overview

Thank you for choosing the Cisco Services Ready Platform SRP 500 Series. The 
Services Ready Platform has the features needed for small business.

SRP 500 Series platforms include:

•

Intelligence to support voice, data, security, and application services.

•

Industry-leading Session Initiation Protocol (SIP) stack to deliver clear, high-
quality voice service.

•

Interoperability with popular soft switches and voice gateways.

•

Integrated security, VPN capabilities, and an 802.11n wireless access point.

•

Standards-based provisioning for streamlined deployments.

Product Overview

The 

Services Ready Platform

, a member of the Cisco Small Business Pro family, is a 

unified communications solution for small businesses that provides voice, data, 
video, security, and wireless capabilities.

With its web-based interface, the Services Ready Platform is easy to setup and 
configure.

Summary of Contents for SRP 526W















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands