background image

For customers in AL, FL, GA, KS, SC, TN

MGCP.U.1304.O

5

# Phone Feature

Description

4

Line keys

Indicates phone line status. When lit:

Green:

 Line is idle.

Red (steady):

 Line is active or in use.

Red (blinking):

 Line is on hold.

Orange:

 Line is unregistered (cannot be used).

These keys can also be programmed to perform functions such 

as speed dial, call pickup, or monitoring an extension.

5

Softkey buttons

Press a softkey button to perform the action shown on the 

LCD screen above.

6

Navigation button

Press an arrow key to scroll left, right, up, or down through 

items shown on the LCD.

7

Messages button

Press to access voice mail.

8

Hold button

Press to place a call on hold.

9

Setup button

Press to access a menu to configure features.

10

Mute button

Press to mute or unmute the phone. When phone is muted, 

the button glows red. A flashing mute button indicates the 

network connection cannot be found.

11

Volume button

Press + to increase the volume and - to lower the volume of 

the handset, headset or speaker (controls speaker volume for 

when the handset is off the phone, or ringer volume for when 

the handset is on the phone).

12

Headset button

Push to turn the headset on or off. When the headset is on, the 

button glows green.

13

Speaker button

Push to turn the speaker on or off. When the speaker is on, the 

button glows green.

14

Keypad

Use to dial phone numbers, enter letters, and choose menu 

items.

Summary of Contents for SPA504





















Reviews: