Inner CMA arm attachment clip
5
Flange on rear of outer left slide rail
1
“
UP
”
orientation marking
6
CMA retaining bracket
2
Outer CMA arm attachment clip
7
Flange on rear of right mounting bracket
3
Flange on rear of outer right slide rail
4
Connect Cables
This section describes how to connect your Cisco SNS-3415 or Cisco SNS-3495 appliance to the network
and the appliance console.
•
Connect the Network Interface, on page 24
•
Connect the Console, on page 25
•
Connect the Keyboard and Video Monitor, on page 25
•
Cable Management, on page 26
Attach cables (such as keyboard, monitor cables, if required) to the rear of the server. Route the cables properly
and use the cable straps to secure the cables to the slide rails. See the
Cisco SNS 3415 or SNS 3495 Appliance
Back Panel View , on page 6
for reference on the rear view of the appliance.
Connect the Network Interface
Warning: Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001
Warning
This section describes how to connect the Cisco SNS-3415 or Cisco SNS-3495 appliance Ethernet port.
The Ethernet connector supports Serial over LAN (SOL) cables. The RJ-45 port supports standard
straight-through and crossover Category 5 unshielded twisted-pair (UTP) cables. Cisco does not supply
Category 5 UTP cables; these cables are available commercially.
Cisco SNS-3400 Series Appliance Hardware Installation Guide
24
Install the Cisco SNS 3415 and Cisco SNS 3495 Hardware Appliances
Connect Cables